1010 Babbitt

Metcar 1010 Babbit Standard Plain Sleeve Bearing

For General Purpose Self-Lubricating Applications up to 350°F Operating Temperature (Dry or Submerged)

Metcar 1010 Babbitt is a specially formulated self-lubricating bearing material that can be used for both dry and submerged applications.

Metcar bearings can be manufactured in sizes up to 6″ diameter shaft. The sizes listed are normally available from stock, and have been sized to provide long bearing life under normal load and speed conditions. The dimensions shown will also provide proper bearing press fit in housings and correct shaft running clearance for operating temperatures up to 350°F.

*Bearings sized to meet your exact operating conditions are available on short order.

item # shaft size housing id od id length
C-110 1/8″ .374/.375″ .377/.378″ .130/.132″ 1/4″
C-111 3/16″ .4365/.4375″ .439/.440″ .192/.194″ 1/4″
C-112 1/4″ .499/.500″ .502/.503″ .255/.257″ 5/16″
C-113 5/16″ .5615/.5625″ .5645/.5665″ .318/.320″ 3/8″
C-114 3/8″ .624/.625″ .627/.629″ .381/.383″ 3/8″
C-115 7/16″ .686/.687″ .689/.691″ .443/.445″ 1/2″
C-116 1/2″ .874/.875″ .877/.879″ .507/.509″ 5/8″
C-117 9/16″ .936/.937″ .939/.941″ .569/.571″ 5/8″
C-118 5/8″ .999/1.000″ 1.002/1.004″ .632/.634″ 7/8″
C-119 11/16″ 1.060/1.062″ 1.064/1.066″ .695/.697″ 1″
C-120 3/4″ 1.123/1.125″ 1.127/1.129″ .758/.760″ 1-1/4″
C-121 13/16″ 1.185/1.187″ 1.189/1.191″ .820/.822″ 1-1/4″
C-122 7/8″ 1.248/1.250″ 1.252/1.254″ .883/.885″ 1-3/8″
C-123 15/16″ 1.310/1.312″ 1 314/1.316″ .945/.947″ 1-3/8″
C-124 1″ 1.373/1.375″ 1.377/1.379″ 1.008/1.010″ 1-1/2″
C-125 1-1/8″ 1.623/1.625″ 1.627/1.629″ 1.134/1.136″ 1-3/4″
C-126 1-3/16″ 1.685/1.687″ 1.689/1.691″ 1.196/1.198″ 1-7/8″
C-127 1-1/4″ 1.748/1.750″ 1.752/1.754″ 1.259/1.261″ 1-7/8″
C-128 1-3/8″ 1.873/1.875″ 1.877/1.879″ 1.384/1.386″ 2″
C-129 1-7/16″ 1.935/1.937″ 1.939/1.941″ 1.446/1.448″ 2-1/4″
C-130 1-1/2″ 1.998/2.000″ 2.002/2.004″ 1.509/1.511″ 2-1/4″
C-131 1-5/8″ 2.123/2.125″ 2.127/2.129″ 1.634/1.636″ 2-1/2″
C-132 1-11/16″ 2.185/2.187″ 2.189/2.191″ 1.696/1.698″ 2-5/8″
C-133 1-3/4″ 2.248/2.250″ 2.253/2.255″ 1.761/1.763″ 2-5/8″
C-134 1-7/8″ 2.373/2.375″ 2.378/2.380″ 1.886/1.888″ 2-3/4″
C-135 1-15/16″ 2.560/2.562″ 2.565/2.567″ 1.948/1.950″ 3″
C-136 2″ 2.623/2.625″ 2.628/2.630″ 2.011/2.013″ 3″
C-137 2-1/8″ 2.748/2.750″ 2.753/2.755″ 2.136/2.138″ 3-1/4″
C-138 2-3/16″ 2.810/2.812″ 2.815/2.817″ 2.198/2.200″ 3-1/4″
C-139 2-1/4″ 2.998/3 000″ 3.004/3.006″ 2.262/2.264″ 3-1/2″
  • • Complete self-lubrication
  • • Constant and low coefficient of friction
  • • Ability to be used either dry or submerged
  • • Outstanding wear resistance
  • • No galling or seizing to shaft
  • • Dimensional stability, whether dry or submerged
  • • Non-contaminating
  • • Quiet operation
  • • High corrosion resistance
NEED A CUSTOM BEARING?

Contact an Engineer at (914) 941-3738 or fill out the form below

Request 1010 Babbitt